⚡🛴 29.4V 2A Charger (3‑Pin XLR Plug)
 
(Single Output • +29.4V 2A • Round 3‑Pin Male XLR‑Style Connector)

This AC adapter delivers 29.4V DC at 2A through a 3‑pin XLR‑style plug. It’s designed for 24V lithium‑ion battery systems (7S packs), powering scooters, hoverboards, and compact e‑bikes. The XLR format ensures durability and polarity protection.
 
🔧 Charger Form
Input: 100–240V AC, 50/60Hz
Output: +29.4V DC @ 2A (≈59 W)
Connector: Round 3‑pin male (XLR‑style, ~8 mm)
Pinout (typical):
Pin 1 = Positive (+)
Pin 2 = Negative (–)
Pin 3 = Not connected (sometimes sense/LED)
Battery type: 24V Li‑ion (7S pack, 25.2V nominal, 29.4V full)
Common part numbers: FY2940200, XVE‑2940200, DA‑29.4V2A
 
🖥️ Compatible Devices
🛴 Electric Scooters
GoTrax Glider, G1, G2, Edge, Nova, GKS Pro Plus
Jetson Bolt, Bolt Pro (24V versions)
Razor E‑Prime Air, E‑Prime (24V lithium variants)
Hiboy beginner scooters (24V packs)
🛹 Hoverboards
Hover‑1 All‑Star, H1, Titan, Chrome, Remix, SRX A6 Mini
Jetson hoverboards (24V packs)
Gotrax hoverboards (Glide, Flash, Fluxx FX3, etc.)
Generic 6.5", 8", 10" hoverboards with 24V lithium packs
🚲 E‑Bikes & Mobility Gear
Compact folding e‑bikes with 24V lithium packs (Ancheer, Ecotric, Nakto entry‑level)
Some lightweight mobility scooters with 24V lithium systems
 
✅ Common Uses
🔌 Charging 24V lithium battery packs (29.4V full charge)
🧩 Replacing lost or damaged OEM chargers
🛠️ Servicing scooters, hoverboards, and e‑bikes
📦 Universal replacement for 29.4V 2A XLR chargers
 
🧠 Signal Format
⚡ Input: Universal AC (100–240V)
🔋 Output: Single DC rail (29.4V only)
🔌 Plug: 3‑pin XLR male, keyed for polarity
🔁 No data — power only
 
⚠️ Things to Watch Out For
🚫 Not interchangeable with 42V (36V systems) or 54.6V (48V systems)
🔌 XLR pinout must match — some brands wire differently
📉 SLA vs Li‑ion chargers differ — this one is for Li‑ion only
🧪 Always confirm battery label: “24V” nominal, 29.4V full charge
🧯 Avoid using with 36V or 48V packs — will undercharge or damage
 
🛠️ Quick Tips for Beginners
🧭 Look for “29.4V 2A” and “XLR” on the charger label to confirm match
🔌 Match the 3‑pin XLR plug — don’t substitute with barrel or 2‑pin plugs
🧪 If device won’t charge, check for bent pins or reversed polarity
🧯 Label adapters clearly to avoid mix‑ups with 24V SLA (29V) or 36V (42V) chargers
🧵 Treat as the universal 24V lithium charger for scooters and hoverboards