top of page

🧠📽️ DVI + USB • M1 (P+D) Cable


This cable combines a DVI-D connector for digital video and a USB-A connector for control/data, merging both into a single M1-D (P&D) plug. It’s used to connect PCs or media players to projectors that support video and USB input via M1.

 

🔧 Cable Format & Use Case

  • 🔌 DVI-D Male + USB-A Male → M1-D (P&D) Male
    • DVI-D transmits digital video
    • USB-A enables control features (e.g. wireless presenter, mouse emulation)
    • M1-D plugs into projector’s input port
    • Use Case: Deliver video and USB control to M1-equipped projectors using one cable

 

🖥️ Compatible Devices

  • 💻 Desktop PCs and laptops with DVI-D and USB-A outputs
  • 📽️ Projectors with M1-D (P&D) input (Infocus, Dell, Toshiba, ViewSonic, ASK Proxima)
  • 🧠 AV carts and classroom setups using wireless presenters
  • 🛠️ Embedded systems requiring combined video/control routing

 

✅ Common Uses

  • 🎥 Present from PC to projector with video and USB control
  • 🧠 Enable wireless presenter or mouse control via USB passthrough
  • 🛠️ Simplify cable runs—one cable for both video and control
  • 🏫 Classroom and conference room AV setups
  • 🧪 Test legacy projectors with integrated DVI + USB input

 

🧠 Signal Format Notes

  • ⚙️ DVI-D: Digital video only—no analog pins used
  • 🔌 USB-A: Standard USB 2.0 for control/data
  • 📡 M1-D (P&D): 29-pin connector supporting DVI-D, VGA, USB
  • 🔊 No audio support—M1 does not carry sound
  • 📉 Resolution support typically up to 1080p depending on projector capability

 

⚠️ Things to Watch Out For

  • 🚫 Not compatible with HDMI or analog VGA without active conversion
  • 🔌 USB must be connected for control features to work
  • 🧯 Some projectors require manual input selection or driver support
  • 📉 No HDCP support—may block protected content
  • 🧪 Cable length affects USB reliability—keep under 10 ft for best performance

 

🛠️ Quick Tips for Beginners

  • 🧠 Identify M1-D (P&D) by its wide rectangular 29-pin layout
  • 🔍 Confirm your projector supports USB control via M1
  • 🧼 Clean M1 contacts gently—dust can cause flickering or sync issues
  • 🏷️ Label both ends—USB and DVI often get tangled in AV setups
  • 🎨 Use in legacy AV environments where combined control and video are needed

DVI + USB → M1 (P+D) Cable • Male → Male

PriceFrom $14.00
Quantity

    You might also like

    Need Help? Don't Hesitate To Contact Us!

    We accept the following paying methods

    Visa.png
    Diners.png
    Discover.png
    PayPal.png

    © 2025 by EndCab Inc.

    bottom of page